| the State standard extends on the beehives intended for the maintenance of beer families.
Technical requirements. Beehives produce according to standard requirements under drawings and other engineering specifications, confirmed when due hereunder. To manufacturing of beehives apply saw-timbers from wood of a fur-tree, a fir, a cedar (GOST 8486-66) or from linden and aspen wood (GOST 2695-71). Humidity of wood at manufacturing of beehives should not exceed 15%.
Application in products of synthetic materials should be co-ordinated with Ministry of Health or with the corresponding organisations of republics.
For connection of wood details of beehives, and also for zadelki apertures from the dropped out knots apply the waterproof glue providing strength at folding on a glutinous layer in a dry condition. A case wall produce from one detail. It is supposed to produce a wall of the case from two or three details which connected in a groove and a crest or on rejku and have been stuck together among themselves, thus glutinous seams of details of walls of the beehive joined under a corner 90 °, should defend from each other not less than on 70 mm.
The Collected product should stand on a horizontal plane steadily and not to have warps.
Details of the beehives delivered in the disassembled kind, produce with the accuracy, allowing to collect products without additional adjustment. At details of the beehives leaving on obverse surfaces, agnails, sharp edges of corners are not supposed. Obverse surfaces of beehives process drying oil and paint an oil paint in two layers. A paint take white colour or light shades of yellow or blue colour. At will of the consumer it is possible to deliver the beehives which obverse surface is covered by drying oil in two layers without colouring.
The Design of beehives should correspond to the engineering specifications confirmed when due hereunder.
Sections
reception Rules
Packing, transportation and storage
|
